I have had a few emails now from people asking for STL files to print themselves some of the wire guides I have used on my disguised cobweb or my 20m wire moxon.
I have no idea what size tubes other people are using so I have made a set that covers 7mm up to 25mm in 1mm increments.
Each size should grip about a half mm smaller than design and expand about a half mm bigger.
They are designed for M3 machine screws and I recommend using nyloc nuts so they can be nipped up enough to grip without over tightening.
The wire holes are 3.5mm which is bigger than the tri rated wire I used on my 20m moxon so should be fine for most people.
To print orientation below is best for strength and doesn’t need supports. I recommend PETG and with several walls also for strength.
Download the files from the link below
https://www.thingiverse.com/thing:6680276